Article No. VK-10152
Ultrasonic Probe 2 MHz for GS200/GS200i/FlowDop200
Single-element transducer with a frequency of 2 MHz suitable for investigations with medium penetration depths, equipped with special plug for connection to GS200, GS200i or FlowDop200
With a frequency of 2 MHz, these red-marked probes are suitable for a wide range of applications. Due to the higher frequency, the axial and lateral resolution power is clearly higher than with the 1 MHz probes. On the other hand, the attenuation for 2 MHz in most materials is still not too large, so investigation areas at medium depth can still be reached without any problem. In particular, these probes are also suitable for studies on medical objects and as ultrasonic Doppler probes.
Frequency: 2 MHz
Dimensions: length = 70 mm, diameter = 27 mm
Cable length: approx. 1 m
Sound adaptation to water/acrylic
Special plug with probe identification for connection to GS200 / GS200i
PHY02 | Sound velocity in solids |
PHY03 | Acoustic attenuation in solids |
PHY04 | Acoustic attenuation in liquids |
PHY05 | Spectral investigations |
PHY08 | Ultrasonic B-Scan |
PHY09 | Ultrasonic computer tomography (CT) |
PHY10 | Characteristics of sound field |
PHY13 | Ultrasonic Doppler effect |
PHY15 | Fluid mechanics |
PHY16 | Mechanical scan methods |
PHY20 | Determination of focus zone |
PHY21 | Reflexion and transmission at boundaries |
PHY22 | Phase shift and resonance effects |
PHY23 | Dispersion of ultrasonic waves (Lamb waves) |
IND01 | Non-Destructive Testing (NDT) |
IND03 | Level measurement |
IND05 | Doppler flow measurement |
IND06 | Angle beam testing |
IND07 | Crack depth determination (TOFD) |
IND08 | Detection of discontinuities |
IND09 | Transit time flow meter |
MED04 | Biometry at the eye phantom |